A.P.S HYDRAULIC 4-ROLL PLATE BENDING ROLL MODEL 4R-246100

A.P.S HYDRAULIC 4-ROLL PLATE BENDING ROLL MODEL 4R-246100


Design: Four Roll Hydraulic Double Initial Pinch Plate Bending Roll


CAPACITY AND SPECIFICATIONS:

Rolling Capacity:  1.125”  X 246”  36,000 Psi Yield Min Dia 32” ID /   .750” X 246”  50,000 Psi 


Yield Min Dia 28.5” ID


Top Roll Diameter: 25” 

Bottom Roll Diameter: 26”

Side Roll Diameter: 21” 

Roll Face: 246”

Approx. Floor Space: 425“L X 120” W  X 120 H

Hp: 100


Approximanted Weight : 220,000 Lbs



STANDARD FEATURES INCLUDE:  

1. Top And Bottom Rolls Driven by Hydraulic Motor / Planetary Transmission

2. Hydraulic Drop End

3. Remote Control Pedestal

4. Variable Speed Adjustment of Rolls

5. Spherical Roller Bearings

6. Electrical Disconnect

7. Welded Steel Construction

8. 1040/1045 Solid Steel Rolls  /Top Roll Cr Mo Steel      

9. Safety Cut-off Switch

10. Enclosed Drive

11. Form Roll Position Indicator

                                             

OUT STANDING FEATURES FOR 4 – ROLL HYDRAULIC INITIAL PINCH  PLATE BENDING ROLL


MAIN DRIVE:

This function is accomplished by the use of highly efficient hydraulic radial piston motors driving planetary gearboxes directly coupled to rollers via torque fuses. Top roll and pinch roll gearbox ratio is 25:1.The top roll drive has  a hydraulic brake installed.


HYDRAULIC SYSTEM:

The hydraulic system consists of variable displacement hydrostatic piston pump with a variable displacement piston pump attached via threw shaft. The attached piston pump  provides oil for hydraulic form, pinch and drop-arm cylinders functions. Solenoid operated valves of the NFPA standard, hydraulic fittings and hoses of standard JIC specification.

The hydraulic pinch roll and form rolls are synchronized end to end for parallel movement to top roll. The synchronization of rolls end to end is accomplished via hydraulic proportional valves controlled by PLC, the PLC receives signals from linear displacement transducers, the PLC compares roll position end to end and corrects by sending an output to the proportional valves. The control system also allows tilting of pinch and form rolls.  


ROLLS AND BEARINGS:

Pinch roll and form rolls are machined from forged 1040/1045. Top roll machined from forged Cr/Mo steel. All rolls are crowned for the capacity of the machine. Crowning compensates for the deflection of the rolls under load. All rolls ride in spherical roller bearings requiring very low maintenance.


ROLL POSITION READOUT  AND WITH SYSTEM MONITORING:

The position of pinch and form rolls are displayed on a back lighted Touch Panel on the moveable 


operator control panel. The Touch Panel is also used to monitor the system pressure, forming pressure ,pinch pressure and roll drive pressure. The touch panel is protected by a clear acrylic cover.


invnhcam060315


Ind06/11/2015-Johanes

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.