CNC Lathe Turn Centre

Please click photos or list for details

2009 Doosan Puma 800M CNC Lathe

2009 Doosan Puma 800M
Control:Fanuc 21iT
Condition:Excellent
Under Power:Yes
 
Capacity:
•Swing over bed: 40.5"
•Swing over carriage: 31.5"
•Maximum turning diameter: 35.4"
•Distance between centers: 76.8”
•Maximum turning length: 63.0"

Spindle:
•Spindle speed: 750 RPM
•Spindle nose: ASA A1-20
•Spindle bore diameter: 12.6”
•Gear ranges: 2
•A.C. Spindle Motor (30 min. rating): 60 HP
•Maximum spindle torque (30 min. rating): 4,873 ft-lbs

Spindle Indexing:
•Minimum programmable angle (degrees): 0.001 degrees
•Rapid traverse rate: 14 RPM
•Indexing repeatability: +/- 0.006 deg.
•Indexing positioning accuracy: 0.0167 deg.

Turret:
•X axis travel: 18.5"
•Z axis travel: 65.0"
•X axis rapid traverse rate: 470 IPM
•Z axis rapid traverse rate: 630 IPM
•X axis feed thrust (continuous/intermittent): 3,496 / 5,593 lbs.
•Z axis feed thrust (continuous/intermittent): 6,737 / 10,780 lbs.
•Ball screw diameter (X/Z): 2.0” / 2.5”
•X axis repeatability: + 0.00008"
•Z axis repeatability: + 0.00012"
•Number of tools: 12
•Boring bar diameter: 3.0"

Rotating tools:
•Rotating tool RPM: 30 - 3,000 RPM
•Rotating tool spindle motor (30 min. rating): 15 Hp
•Rotating tool torque (30 min. rating): 103.5 ft-lbs.
•Rotating tool holder type: BMT 85P
•Rotating tool collet type: ER 50
•Milling collet capacity: 1/4" to 1 1/4"

Tailstock:
•Tailstock quill diameter: 6.3"
•Tailstock quill stroke (programmable): 5.9"
•Maximum tailstock quill thrust: 7,150 lbs.
•Maximum hydraulic pressure: 580 PSI
•Prog. tailstock body stroke: 61.0”
•Tailstock spindle taper (built-in type): MT #6

Coolant Tank:
•Coolant pump pressure: 65 PSI
•Coolant pump motor: 1.2 HP
•Coolant tank capacity: 110 gal.

General:
•Dimensions (Length X Width): 227" x 124"
•Net weight: 36,000 lbs.
•Voltage required: 205 - 230 volt / 3 ph
•Power requirement: 69 KVA

Equipped With:
•Fanuc 21iT Control
•Schunk 24" Air Chuck
•3-jaw manual chuck
•THL5 Hydraulic steady rest  $459,000.00

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

2005 Haas SL-40 Big Bore CNC Lathe, 24" 3 Jaw Manual Chuck

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

Specifications:

Chuck Size:................ 24"
Maximum Swing:............. 40"
Swing Over Cross Slide:.... 25"
Maximum Cut Diameter:...... 25.5"
X-Axis Travel:............. 17"
Z-Axis Travel:............. 44"
Rapid Traverse Rates X/Z:.. 710 IPM/325 IPM
Spindle Nose:.............. A2-11"
Bore:...................... 6.75"
Bar Capacity:.............. 6.75"
Quill Diameter/Taper:...... 4.53"/MT #5
Turret Type:............... 10 Position
Spindle Speed:............. 40 ~ 1,400 RPM
Spindle Motor:............. 55 HP

Equipped With The Following:

24" 3 Jaw Manual Chuck
Extra Performance 55 HP Main Motor
12 HP Z axis Motor
2 Speed Geared Headstock
Chip Conveyor & High Intensity Lighting
Big Bore Option & Chip Conveyor
All Available Manuals

Approximate Dimensions: 186"(LR) X 96"(FB) X 86"(H)
Approximate Weight: 23,000 Lbs.

2008 Haas SL30-LB CNC Lathe

1-USED HAAS SL30 LB BIG BORE LATHE, TAILSTAOCK

Date of Manufacture: 2008 10/08

HOURS:

548.34 Power On

122.23 Cycle Time

103.01 Feed Time

SPECIFICATIONS SUBJECT TO VERIFICATION: 

TURNING DIAMETER 17" MAX. 

DISTANCE BETWEEN CENTERS 61"

MAX. BAR CAPACITY 4" 

EQUIPPED WITH: 

BIG BORE

PROGRAMMABLE TAILSTOCK 

CHIP CONVEYOR 

12" JAW POWER CHUCK 

4" Spindle Hole

It has a normal tool presetter that came from Haas 

RPM:  2,400 RPM—The standard for the big bore machines.

Tooling:  No, they have several other Haas machines that they will use the tooling on. 

HAAS SL-30 LONG BED CNC LATHE

EQUIPPED WITH: 

( MUST BE VERIFIED BY CUSTOMER)

 BIG BORE OPTION

PROGRAMMABLE TAILSTOCK

TOOL PRE-SETTER

16 MB MEMORY

SPINDLE ORINTATION

HARD DRIVE ETHERNET

8 M FUNCTION AND MACROS

MEMORY KEY SWITCH

REMOTE JOG HANDLE

12" CHUCK

2400 RPM SPINDLE

BELT DRIVEN CHIP CONVEYOR

REMOTE JOG HANDLE

$97,000.00 FOB truck, Pennsylvania 

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

2008 HAAS TL4 CNC Turning Center

 

2008 Haas TL-4
CNC Machining Center

Specifications:
Control Haas
Chuck Size 25"
Max Swing Over Bed / Carriage 35" / 16"
Max Turning Diameter  35"
Distance Between Centers  91"
Max Machining Length  71.5"
 Tools  8
Spindle Speed 500 RPM
Spindle Bore 10.81"
Spindle Nose A1-20
Spindle Motor 55 HP
Spindle Torque 4000 ft. lbs.
Rapid Traverse Rates (X / Z) 150 / 320 IPM
X-Axis Travel  18"
Z-Axis Travel  71.5"

Equipped With:,(*must be verified by buyer):
Haas Intuitive Programming System
15" Color LCD
1 MB Memory
Two Speed Gearbox
Manual Tailstock
 8 Position Turret
Programmable Steady Rest
Front & Rear A1-20 Spindle Noses
10.81" Spindle Bore
25" Manual 4-Jaw Chuck on Front of Spindle
25" Manual 3-Jaw Chuck on Rear of Spindle
Chip Conveyor
Traveling Chipguard
Heavy Duty Box Way Construction
Mfg Date September 2008
Machine Dimensions (L x W x H) 232" x 91" x 85"
Machine Weight 25,880 lbs
All Available Manuals
Hours Subject to Change:
                               6,000 Servo on Time
                               1550 In Motion Time
                               1700 Spindle Time

Machine Weight, Approx. 7,500 Lbs           Dimensions, Approx. 92" X 93" X 106"H    
$224,900.00 PLUS FREIGHT & RIGGING

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

 2007 HAAS TL-1 Tool Room CNC Lathe

2007 HAAS TL-1 Tool Room CNC Lathe Specifications: 

Control ........................... Haas 

X-Axis Travels .................... 8" 

Z-Axis Travel ..................... 30" 

Swing Over Front Apron ............ 16" 

Swing Over Cross Slide ............ 9.5" 

Chuck Size ........................ 8" 

Max Cutting Diameter .............. 16" 

Max Cutting Length ................ 30" 

Distance Between Centers .......... 30" 

Max Spindle Speed ................. 1,800 RPM 

Spindle Motor ..................... 7.5 HP 

Max Torque ........................ 100Ft-Lbs @ 375 RPM 

Spindle Nose ...................... A2-5 

Spindle Bore ...................... 2.31" 

Rapid Traverse Rates .............. 75X/ 150Z IPM 

Machine Dimensions ................ 83.2"L x 54.4"W x 78"H 

Machine Weight .................... 4,100 Lbs 

Manual Tailstock 15” LCD 

$27,000.00 Only 279 Spindle hours!  

 
Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

2007 Mori Seiki NL2500sy CNC Turning Center

501 MSC CONTROL, 10" CHUCK ON MAIN SPINDLE, 6" CHUCK ON SUB-SPINDLE
(1) MORI SEIKI NL-2500SY CNC TURNING CENTER
NEW: 2007, Installed: FALL
SPECIFICATIONS:
BAR CAP: 3"
MAX. TURNING DIAMETER: 14.4"
STANDARD TURNING DIAMETER: 10.6"
MAX. TURNING LENGTH: 27.7"
TRAVEL - X AXIS TRAVEL: 10.2"
- Z AXIS TRAVEL: 31.3"
- Y AXIS TRAVEL: 3.9" <±2.0>
- SUB SPDL TRAVEL (B-AXIS): 28.9"
 MAX. SPINDLE SPEED - MAIN: 4,000 RPM
- SUB SPDL: 6,000 RPM
SPINDLE MOTOR - MAIN: 35 HP
- SUB: 15 HP
TURRET STATIONS: 12
MAX. ROTARY TOOL SPEED: 6,000
ROTARY TOOL MOTOR: 10 HP
CHUCK ON MAIN SPINDLE: 10"
CHUCK ON SUB-SPINDLE: 6"

EQUIPPED WITH:
501 MSC CONTROL
FULL C AXIS ON MAIN & SUB
PARTS CATCHER
TOOLING: (1) O.D & (1) Face

**HOURS: 2,175


Machine located in the Midwest. USA  $POR$

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

2006 HAAS SL10 CNC Lathe

Used HAAS SL-10T (2006)
HAAS SL-10T
NEW: 2006

SPECIFICATIONS:

MAX SWING OVER FRONT APRON.......... 16.25"
SWING OVER CROSS SLIDE.............. 8"
MAX TURNING DIAMETER................ 11"
 DISTANCE BETWEEN CENTERS............ 16.5"
MAX TURNING LENGTH.................. 14"
X-AXIS TRAVEL....................... 6.25"
Z-AXIS TRAVEL....................... 14"
RAPID TRAVERSE RATES................ 1200 IPM
 SPINDLE BORE........................ 2.3"
MAX BAR CAPACITY.................... 1.8"
SPINDLE SPEED....................... 6,000 RPM
SPINDLE MOTOR....................... 15 HP
SPINDLE NOSE........................ A2-5
 TURRET CAPACITY..................... 12 STATIONS
APPROX MACHINE DIMENSIONS........... 91" X 55" X 69"
APPROX MACHINE WEIGHT............... 6,000 LBS

EQUIPPED WITH:

8" 3-JAW HYDRAULIC CHUCK
 MANUAL TAILSTOCK W/ HYDRAULIC QUILL
BARFEED INTERFACE
WORK GAUGING PROBE
CHIP AUGER
PARTS CATCHER
VISUAL QUICK CODE
SPINDLE ORIENTATION
MISC. TOOL HOLDERS.

HOURS AS OF 9/2011
SERVO ON TIME - 6343 HRS
 IN MOTINO TIME - 3730 HRS
SPINDLE TIME - 4223 HRS

** COLLET SYSTEM ON MACHINE IN PHOTOS -- NOT INCLUDED IN SALE
** CUT PRIMARILY ALUMINUM & PLASTIC
** IN PLANT, UNDER POWER
** REPLACEMENT COST AS EQUIPPED ABOVE -- $65,000                $POR$

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

2005 Mori Seiki MT2000a1SZ  w/MSX-501T w/MappsII (Fanuc 18i)

Full Cover Coolant System(29psi-79.2 Gallon Tank)
Built-In Work Lights Caps MT Off Line Programming System
Caps MT off Line Programming Simulation Color Display
Conversational and G-Code Programming Tool Path Graphics
PCMCIA/RS-232 Interfaces Load Monitor
Tool Life Management Multiple Repetitive Cycle1 (TypeI and Type II Canned Cycle)
Custom Macro Programmable Data Input G10
Number of Stored Programs 125 Hydraulic Cylinder & Draw Tube (Main Spindle)
A2-6? Spindle Nose, 2.9? Spindle thru Hole (2.5 thru Draw Tube) Main Spindle
8? Hollow Hydraulic Chuck w/ 1 set of Soft Jaws (Main Spindle) 45-4,500RPM(Main Spindle)
30/20 HP Main Spindle
High/Low Chuck Pressure System (Main Spindle) Air Blow (Main Spindle)A2-5? Spindle Nose (Sub Spindle)
8? Hollow Hydraulic Chuck w/ 1 set of Soft Jaws (Sub Spindle) 20 HP Sub Spindle
High/Low Chuck Pressure System (Sub Spindle) Air Blow (Sub Spindle)
Tool Spindle Taper Hole Capto C6 Tool Spindle 12,000RPM (24.7/20HP)
180 Tools ATC Magazine Automatic Tool Presetter (Tool Spindle)
Automatic Tool Presetter (Bottom Turret) Tool Offsets B Axis-720 Sets
Tool Offsets Lower Turret-99 Sets Part Program Length 520 Meters
Lower Turret 12 Station Bolt Down Type (12 Live) Parts Catcher
High Pressure Coolant Interface (Rated for 1,000 PSI) Signal Tower 3 Stage
Barfeed Interface Chip Conveyor
4 Spindle Liners Cool-Jet System 1,000 PSI Dual Filter Unit
11 T00159 Dual Turning Holders 
Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

2005 Okuma & Howa 2SP-25HG Single Gantry Twin Spindle CNC Lathe

 

2005 Okuma & Howa 2SP-25HG Single Gantry Twin Spindle CNC Lathe
Condition: Excellent
Control: Fanuc 18iTB
MAX CUTTING DIAMETER................ 13.78"
MAX CUTTING LENGTH.................. 7.87"
DISTANCE BETWEEN SPINDLES............ 15.75"
SPINDLE CENTER HEIGHT FROMFLOOR..... 47.44"
SPINDLE MOTORS...................... 25 HP
SPINDLE SPEED RANGE................. 4500 RPM
SPINDLE NOSE........................ A2-6
HOLE DIAMETER....................... 2.01"
FRONT BEARING DIAMETER.............. 3.94"
X AXIS TRAVEL....................... 6.89"
Z AXIS TRAVEL....................... 8.27"
TURRET TYPE)........................V10 + V10


EQUIPPED WITH:
GANTRY LOADER WITH (24) STATION PALLET POOL (work stocker)
REAR DISCHARGE CHIP CONVEYOR
COOLANT TANK
NO CHUCKS WITH MACHINES
HYDRAULIC DRAWBARS YES             $179,500.00

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

2004 Haas SL20T CNC Lathe

2004 Haas SL-20t
Horizontal CNC Turning Center

Specifications:
Swing Diameter: 20"
Chuck Size: 8" 3 Jaw
Max Cutting Diameter: 10"
Between Center: 20"
Spindle Speeds: RPM 50-4000
Number of Tools 10
Spindle Motor HP: 20 Vector Drive
Voltage: 230 VAC, 3 Ph

Equipped With:,(*must be verified by buyer):
Haas Triple High-Speed Cnc Ctrl W/15" Color Lcd
Rs-232c Port
8" 3-Jaw Hydraulic Through Hole Chuck W/Jaws
Tool Presetter
Haas Quick Code Programming
Auto Parts Catcher
Programmable Tailstock
Chip Auger
1 Mb Memory
Spindle Orientation
Custom Macros,
Barfeed Interface
High Intensity Lighting,
Servo Bar 300 Bar Feeder
Standard Coolant System With Tank And Pump,
Standard 3.5" Floppy Disc Drive
Standard 1 Meg Memory
Standard Rigid Tapping

All Available Manuals
APPROX. DIMENSIONS: 127" x 75" x 74"
MACHINE WEIGHT (APPROX): 9000 LBS
Hours Subject to Change:
Servo on 2,700
Motion 10,354
Spindle 10,905               $62,900.00

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

2002 Haas SL40T 4.62" Bore CNC Turning Center

2002 Haas SL-40t CNC Turning Center
4.62 bore 4.06 bar cap 40sw x 44X

Specifications:
Control Haas
Maximum Swing Over Front Apron. 40"
Swing Over Cross Slide 25.0"
Maximum Turning Diameter 25.5"
Maximum Turning Length 44.0"
 X Axis Travel 17.0"
Z Axis Travel 44.0"
Rapid Traverse Rate X Axis 710 Ipm
Rapid Traverse Rate Z Axis 710 Ipm
Spindle Bore 4.62"
Bar Capacity, Max 4.06"
Spindle Nose A2-8
Spindle Speeds (Geared) 2,400 Rpm
 Spindle Motor 40 Hp
Turret Capacity 10 Station

Equipped With:,(*must be verified by buyer):
Haas 32-Bit Cnc Control With 14" Lcd Screen
Rs-232c Port Interface For Dnc Operation
15" 3-Jaw Hydraulic Through Hole Chuck With Hard Jaws,
 Tool Pre Setter Arm
Chip Auger
3.5" Floppy Disk Drive
1 Meg Memory
Tailstock
Standard Coolant System
Rigid Tapping
Fully Enclosed Splash Guarding

Hours Subject to Change
Not Under Power

All Manuals

Dimensions 190" L x 98" W x 86" H
Weight 25,000 Lbs               $95,000.00

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

2001 DOOSAN QL-30H, TWIN SPINDLE GANTRY LOAD CNC LATHE 2001 FANUC 18 TB CNC CONT INVNJ0312

2001 DOOSAN QL-30H, TWIN SPINDLE GANTRY LOAD CNC LATHE
 
FANUC 18 TB CNC CONTROL

MAX. TURNING DIA: 12.2”

MAX TURNING LENGTH: 9.06”

SPINDLES: 2 X 25 HP—3,500 RPM

A2-8 NOSE

2.52” BAR CAPACITY

LOADER TRAVELS: 165” X 35.4” X 7.87”

EQUIPPED WITH:

STOCKER TABLE

CHIP CONVEYOR

NO CHUCKS AVAILABLE (12.0” STANDARD)        $99,500.00

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

2001 Haas SL30-T 30" sw x 39" cc 3.5" Bore TLSTK

2001 Haas SL-30T CNC Turning Center
34 inch swing
17 inch swing over crosslide
14.5" Max. Turn Dia.
34" Max. Turn Length
2.5" Bar Capacity
 3.04 inch bore
3400 RPM
30 HP
12 Tools

Equipped with:

Tailstock
3.5" Floppy Disk
Parts Catcher
Chip Auger
1 MB of Memory
Barfeed Interface
High Intensity Lighting
more modern style turret

SUBJECT TO OUR TERMS AND CONDITIONS
SUBJECT TO PRIOR SALE
HOURS AS INDICATED:
1461 Servo
530 Motion
507 Spindle Hours 
IN PLANT UNDER POWER            $53,500.00 or best offer

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

2001 HAAS SL-30T CNC Lathe

SL30T 30 inch sw x 39 inch cc 3.5 in bore TLSTK PA
 
YOM 2001 w/500 hours

Condition: excellent

HAAS SL-30T CNC TURNING CENTER


GENERAL SPECIFICATIONS:

DATE OF MANUFACTURE 2001
SWNG OVER FRONT APRON 30"
SWING OVER CROSS SLIDE 14.5"
 DISTANCE BETWEEN CENTERS 39"
X AXIS TRAVEL 11.3"
Z AXIS TRAVEL 34"
RAPID TRAVERSE RATE ALL AXES 710 IPM
SPINDLE NOSE A2-8
SPINDLE SPEEDS 3400 RPM
SPINDLE MOTOR 30 HP
SPNDLE BORE 3.5"
 MAX. BAR CAPACITY 3.0"
SPINDLE MOTOR 30 HP
TURRET CAPACITY 12 STATIONS
TAILSTOCK CENTER MT #4
TAILSTOCK BODY TRAVEL 33.5"
APPROX. DIMENSIONS 147" x 77" x 75"
MACHINE WEIGHT (APPROX) 16,000 LBS

EQUIPPED WITH:

HAAS 32-BIT CNC CONTROL WITH 14" LCD SCREEN
RS-232C PORT INTERFACE FOR DNC OPERATION
10" 3-JAW MMK HYDRAULIC THROUGH HOLE CHUCK
TOOL PRESETTER, 1MB MEMORY, CHIP AUGER
 SPINDLE ORIENTATION, DELTA WYE MOTOR
PARTS CATCHER, FLOPPY UPGRADED TO USB PORT
FULLY ENCLOSED SPLASH GUARDING/ENCLOSURES
ALL AVAILABLE TURRET TOOLING & MANUALS
UNDER POWER ON OUR FLOOR

 LOCATION: IN PLANT UNDER POWER                $54,500.00

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

2001 Haas SL10T CNC Lathe

2001 HAAS SL-10t
CNC Turning Center 
Specifications:
Control Haas
Swing Diameter 16.25" 

X-Axis Travel 6.25"
Z-Axis Travel 14" 

Rapid Traverse Rates 1200 IPM
Chuck Size 6.5"
Max Bar Capacity 1.75"
Dist. Between Centers 16.5"
Max Turning Dia 11"
Max Turning Length 14"
Spindle Speeds 6,000 RPM
Spindle Motor 15 HP
Spindle Bore 2.31"
Draw Tube Bore 1.81"
Turret Stations 12 

Machine Weight 6,420 Lbs
Machine Dimensions 92"L x 55"W x 69"H
 
Equipped With:,(*must be verified by buyer):         
HAAS CNC CONTROL
3.5" Floppy Disc Drive
1 MB Memory
8" Chuck
5C-Collett Chuck
Tool Pre-Setter
High Flow Coolant Pump
Rigid Tapping
Chip Auger
Tailstock
Auto Parts Catcher             
Dimensions 92 x 55 x 69"
Weight 5500 lb
$32,900.00 Plus Freight and Rigging  

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

2000 HAAS SL-30T CNC Lathe

Make: HAAS CNC Turning Center
Model: SL- 30T
Year: 2000
Swing over Bed: 30”
Max. Turning Diameter: 17”
Max. Distance Between Centres: 34”
 Bed Slant Angle: 45
Spindle Speeds: 3,400 rpm
Maximum Bar Capacity: 3.03”
Spindle Horsepower: 30 HP.
Control: HAAS
Chuck Size: 10” direct mounting
Electrics: 220/3/60
Overall Dimension: 149.5 “ L x 73” W x 74” H
Overall Weight: 16,000 lbs.
Machine c/w: High torque gearbox, hyd. prog. -tailstock, high speed- gearbox, chip auger, floppy drive, quickcode programming, barfeed interface (brushless), macros, tool presetter, 1 MB memory, spindle orientation, rigid tapping, bolt- on turret..
Machine Condition: Good              $POR$

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

Mori Seiki SL253BMC - Multi Axis CNC Lathe

Mori Seiki SL253BMC - Multi Axis CNC Lathe
Specifications:
Swing Over Bed (Inches)..................... 26.8
Swing Over Cross Slide(Inches).............. 20.1
Maximum Turning Diameter(Inches)............ 15.3
 Maximum Turning Length(Inches)............. 19.1
Spindle Nose................................ A2-8
Hole Through Spindle(Inches)................ 3.4
Bar Capacity(Inches)........................ 2.8
"C" Axis Indexing(degree)................... .001
 Spindle Speed(Maximum RPM)................. 3,500
Spindle Speed (Rotary Tools)................ 3,000
Main Motor(HP).............................. 20/15
Turret Tool Positions....................... 10

 Equipped with:
MAPPS MSG-501 CNC Control
10" Kitagawa B210 Chuck
4 Live Tools (2-x / 2-z)
Tailstock
Tool Presetter
Chip Conveyor
Torit Mist Collector
All Available Tooling and Manuals         $119,500.00

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

1997 OKUMA HOWA 2SP-30H ACT 3--30H H/L

1997 OKUMA HOWA 2SP-30H
OKUMA HOWA 2SP-ACT 3--30H H/L
FANUC 18TT CONTROLS
CHIP CONVEYOR
GOOD CONDITION.

TWO UNITS ARE AVAILABLE UNDERPOWER.

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

30" x 120"  MAZAK 1978 POWERMASTER 3000 4.65" Bore 
CNC Fanuc 21i Retrofit

 

SWING OVER BED.................... 30"
SWING OVER CROSS SLIDE............ 18"
DISTANCE BETWEEN CENTERS.......... 120"
HOLE THRU SPINDLE................. 4.625"
SPINDLE MOTOR..................... 60 HP
SPINDLE SPEED..................... 1,200 RPM
SPINDLE NOSE...................... ASA A1-11
TOOLING........................... 8 STATION FRONT, 4 STATION REAR TURRET
RAPIDS............................ 400 IPM

EQUIPPED WITH:

HYDRAULIC TAILSTOCK
16" SMW AIR CHUCK
8 STATION FRONT AND 4 STATION REAR TURRET

** RETROFITTED IN 1998
GE FANUC 21i-T CONTROL ADDED
 ALL AXIS MOTORS & SPINDLE DRIVE REPLACED
60 HP DC SPINDLE MOTOR WAS REBUILT
BOTH X AND Z AXIS BALLSCREWS RECONDITIONED
ENTIRE LUBE SYSTEM WAS REPLACED

** IN PLANT, UNDER POWER, AVAILABLE FOR IMMEDIATE INSPECTION AND PURCHASE

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

31 1/2" x 120" Gurutzpe 1998 CNC Lathe w/4" Bore

 

1998 Gurutzpe AT-600 Flat Bed CNC Lathe
31 1/2" x 120" (800mm x 3048mm)
29" (355.600mm) Swing Over Cross Slide
Model AT-600
4" Spindle Bore
8 Tool Turret
GE Fanuc OT Control
35 HP
31" 4 Jaw Chuck
Steady Rest
Chip Conveyor
Can be seen under power. This lathe is in very good condition.
We have power suppy there if needed.
$69.500.00 FOB Truck

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

Mori Seiki NZ-2000T2Y CNC Turning Center

2008 CNC Turning Center

Chuck Size: 8" (2)

Max Diameter Bar Capacity: 2.5"

Max Swing Over Bed: 31.5"

Turning Diameter (Max / Std): 12.5" / 7.9"

Distance Between Spindles: 44.4"

Max Machining Length: 31.9"

Spindle Speed (L & R): 5000 RPM

Spindle Bore (L & R): 2.9"

Spindle Nose (L & R): A2-6

Spindle Motor (L & R): 33.3 / 29.3 HP

Milling Speed: 6000 RPM

Milling Motor: 10 HP

Tools: 16 x 2 (All Live)

Rapid Traverse Rates (X / Z): 1181 / 1968 IPM

X-Axis Travel (Upper & Lower Turrets): 8.3"

Z-Axis Travel (Upper & Lower Turrets): 31.9"

Y-Axis Travel: 4.3" 

C-Axis Index (Left & Right Spindles): .001 Degrees 

Sub Spindle Travel: 36.2" 

Machine Dimensions (L x W x H): 154.7" x 145" x 91.3"

Machine Weight: 18,700 lbs.


Features:


Moric MSX-701 III (Fanuc 3iT) CNC Control 

15" Color TFT

Twin Opposed Spindles with Upper and Lower Turrets 

Y-Axis Milling Capability on Upper Turret 

CAPPS Conversational Programming 

(2) 8" Kitagawa BB208 3-Jaw Hydraulic Chucks

Manual Tool Presetter (L & R)

Workpiece Unloader / Single Hand (Right Spindle)

Parts Exit Conveyor

Turbo Chip Conveyor (Side Exit)

(5) OD Live Holders (ER32)

(2) Double Face Live Holders

(3) Single Face Live Holders

(4) Double OD Turning Holders

(2) Facing Holders

(2) Double Boring Bar Holders

(1) Cut-Off Holder

(3) Boring Bar Holders

(1) U-Drill Holder

(2) Coolant Thru Spindle Systems (1000 psi ChipBlaster D30)

13,757 Power on Hours

6590 Operating Hours (Head 1)      6441 (Head 2)

3842 Cutting Hours   (Head 1)         2189 (Head 2)

invbk050313jr

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

Mori Seikie Turning Center (Chucker) SL-8F Fanuc 6T Controller

invbj090513jr

Mori Seiki Turning Center (Chucker) SL-8F Fanuc 6T Controller


1983


MODEL #SL-8F


32.0” Chuck Diameter


10.0” Hole Thru Chuck


Swing 6 Stations


9.0” Hole Thru Spindle Turret


Chip Conveyor


Fanuc 6T Controller


CRT & 232 Port

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

Haas SL-30T CNC Turning Center, Low Hours, Only 553 Spindle On Time

Haas SL-30T CNC Turning Center, Low Hours, Only 553 Spindle On Time


2008


General Specifications:


Maximum Swing Over Front Apron:  30"

Swing Over Cross Slide:  14.5"

Maximum Turning Diameter:  14.5"

Maximum Turning Length:  34"

X Axis Travel:  11.3"

Z Axis Travel:  34"

Rapid Traverse Rate X & Z Axes:  710 IPM

Turret Capacity:  12 Stations

Tailstock Quill Taper:  MT #4

Tailstock Body Travel:  33.5"

Approximate Dimensions:  132" x 75" x 80"

Machine Weight (Approximate):  14,000 lbs


Equipped with:


With 10" 3-jaw Chuck

Bolt-on Style Turret

Henning Chip Conveyor

IPS-L

Parts Catcher

Tool  Pre-setter

Spindle Orientaion

Programmable Tailstock


Only 553 Spindle on time


Machine:  132" x 75" x 80" 14,000 lbs

Chip Conveyor: 125" x 23" x 64" 1,500 lbs

Coolant Pan: 135" x 33" x 17" 600 lbs

 
Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

Haas SL-30T CNC Turning Center, 10" 3-Jaw Power Chuck, 2006

Specifications:


Max Swing Over Bed...................................... 30"  

Max Swing Over Carriage................................. 14.5"

Max Machinable Center Distance.......................... 34"

Max Distance Between Centers............................ 34"

Standard Chuck Size..................................... 10"

Cross Travel (X-Axis)................................... 14"

Longitudinal Travel (Z-Axis)............................ 34"

Rapid Traverse Rates.................................... 710 IPM

Number of Turrets....................................... 1

Tool Positions.......................................... 12 Total

Spindle Bore............................................ 3.5"

Bar Capacity............................................ 3"

Spindle Nose............................................ A2-6

Spindle Speed Range (Maximum).......................... 3400 RPM

Spindle Horsepower...................................... 30 HP 

Approximate Dimension................................... 126" x 83"

Approximate Height...................................... 74"

Approximate Machine Weight.............................. 16,000 lbs

 

Equipped with:


Haas 32 Bit CNC Control

10" 3-Jaw Power Chuck

Tool Presetter

RS-232 Port

12 Position Turret

Programmable Hydraulic Tailstock

Coolant System and Chip Auger

invmk190513jr

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

Mazak Heavy Duty Power Master Universal CNC Turning Center

New 1997, Rebuilt 2013


Specifications:


Max Swing Over the Bed.................................. 34"

Max Swing Over Cross Slide.............................. 22"

Max Tailstock Position.................................. 123"

Max Machinable Center Distance.......................... 120"

Chuck Size.............................................. 24"

Cross Travel (X-Axis)................................... 22"

Longitudinal Travel (Z-Axis)............................ 121-3/8"  

Cross Feed Range (.01 Increment)........................ 263 IPM

Longitudinal Feed Range (.01 Increment)................. 315 IPM 

Number of Turrets....................................... 2

Tool Positions ID Turret................................ 8

Tool Positions OD Turret................................ 6

Spindle Bore............................................ 10.2""

Spindle Nose............................................ A1-20

Spindle Speeds (12), Range.............................. 2-750 RPM

Spindle Horsepower...................................... 60 HP

Tailstock Spindle Taper................................. #5 MT

Electrics............................................... 460/3/60

Approximate Machine Dimensions...................... 250" x 130"

Approximate Machine Height.............................. 76" 

Approximate Machine Weight.............................. 28,000 lbs


Equipped with:


Mazak Mazatrol T-Plus CNC Control

Mazatrol Conversational Programming

Front and Rear Chucks

10.2" Thru Hole

8 Position Disc Turret

6 Station ID

Boring Turret

Hardened Bed and Cross Slide Ways

Ballscrews

Heavy Duty Tailstock w/ Hydraulic Quill

Steady Rest

Chip Conveyor

Coolant System

invmk270513jr

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

Haas SL-30TM CNC Turning Center, New 2009

invrm090613jr

Specifications:


Swing Over Front Apron:  30"

Swing Over Cross Slide:  14.5"

Distance Between Centers:  39"

X-Axis Travel:  11.3"

Z-Axis Travel:  34"

Rapid Traverse Rate:  710 IPM

Spindle Nose:  A2-8

Spindle Speed:  3,400 RPM

Spindle Motor:  30 HP

Spindle Bore:  3.0"

Max Bar Capacity:  2.5"

Turret Stations:  12

Live Tooling Motor:  5 HP

Live Tooling Speed:  3,000 RPM

Tailstock Taper:  MT #4

Tailstock Stroke:  33.5"

Approx. Dimensions:  147" x 77" x 75"

Approx. Machine Weight:  16,000 lbs


Equipped with:


Haas CNC Control

Tailstock

Live Tooling

C-Axis

Tool Setter

Dual Vector Drive

Misc. Tooling

10" Chuck

Chip auger

HIL

IPS

VDI Kit

Visual Quick code


Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

Multi-Axis, 4 Live Turret, Dual Y-Axis Nakamura Tome WTW-150MMYY

2008


Chuck Size:  6"

Bar Capacity:  Main - 2.55", Sub - 2"

Turning Diameter:  12"

Turning Length:  8"

Fanuc 18iTB CNC Control

Chip Conveyor

Full C on both spindles

4 turrets, Y-axes on both turrets

(1) ATS A5-16C Collet Chuck

(1) ATS A5-16CTLS Collet Chuck

(4) Grundfoss High Pressure Coolant Pumps

(6) KZ-1510 ER32 Cross Drill Holders

(4) KZ-1513 ER32 Face Drill Holders

2000 hours

invma130613jr

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

Mori Seiki NT3200DCG/1000SZ CNC Multi-Task CNC Turning Milling Center

2006


Configuration:

  

Main Spindle, Sub Spindle, 40 Position ATC, Live Tooling on Lower Turret

Flexible B Axis Universal Swiveling Live Workhead, Driven at the Center of

Gravity Design, Turret with a built-in milling motor

  

Utilization:  Plastic, Low Hours


Specifications:

  

Max Turning Dia.:  23.6"

Max Turning Dia (Over Saddle):  14.57"

Max Turning Length:  41.1"

Spindle Speeds(Main):  5,000-RPM

Rotary Tool Speeds:  12,000-RPM

Sub Spindle Speeds:  4,000-RPM

X Axis Travels:  27"

Y Axis Travels:  4.9"

Z Axis Travels:  42.3"

B Axis Travels:  120 Deg

C Axis Index:  360,000

Bar Capacity:  2.5"

Rapid Traverse:  1968 IPM (X/Z)

Rapid Traverse:  1181 IPM (Y)

Lower Turret with Live Tooling:  12-Station

Spindle (1) Main Motor Drive:  25 HP

Current Electrical Arrangement:  220/3/60

Manufacture Date:  10/2006

Country of Origin:  Japan

  

Equipped With:

 

Mori Fanuc MSX-711IIIPC (31iT) CNC Control

Kitagawa 8" 3-Jaw Chuck on Main

Kitagawa 8" 3-Jaw Chuck on Sub Spindle

Through Spindle Coolant Capable

Universal Tool Spindle

Mori Fanuc MSX-711IIIPC CNC Controls

40 Position Automatic Tool Changer (Capto 5)

Tool Presetter (Left & Right Side Tool Eyes)

Capto C5 Tooling for Universal Milling Head

Tool Life Management 120 Pairs

3D Interface Crash Avoidance

MAPPS 3 Software

Auto Power Shut off

500 Stored Programs

50 MB Memory in MAPPS

240 Number of Tool Offset Pairs

Tool offset for Axis Machining

Addition Of Optional Block Skip/ Soft Key Type

600 Custom Macro Common Variables

All Available Manuals

Shipping Brackets

Less than 4,000 Hours


Approximate Dimensions:  129"(LR) X 116"(FB) X 110"(H)

Approximate Weight:  36,000 Lbs.


 
Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

Mazak 200-IIIS Integrex Multi-Tasking Turning Center

Mazak 200-IIIS Integrex Multi-Tasking Turning Center


Features Series III-full contouring B-Axis Turret and Sub-Spindle


Mazatrol Fusion 640T Pro CNC Control


Specifications:


Standard Chuck Dia. Main Spindle:  8”

Standard Chuck Dia. Second Spindle:  8"

Maximum Swing:  26"

Maximum Cutting Diameter:  26"

Maximum Cutting Length:  40"

Maximum Distance Between Chuck Faces:  41.14"

Spindle Nose:  A2-6

Spindle Bore:  2.99"

Maximum Bar Work:  2.5"

Spindle Speed:  5000 RPM

Spindle Index (Programmable):  0.001 Degree

Spindle Horsepower:  30 HP

Spindle Torque:  258 FT. LBS


SECOND SPINDLE SPECIFICATIONS :     

Spindle Nose:  A2-6

Spindle Bore:  2.99"

Spindle Speed:  5000 RPM

Spindle Index (Programmable):  0.001 Deg.

Spindle Horsepower:  25 HP

Spindle Torque:  241 FT. LBS

Tool Shank Height:  1.0"

Tool Size (Boring Bar Max. Dia.):  1.5"

Magazine Capacity:  40 ATC

Tool Selection Method:  Random

Tool to Tool ATC Time:  1.3 Seconds

Max. Tool Dia. w/All Pockets Full:  3.54"

Max. Tool Dia. w/Adjacent Pockets Empty:  4.92"

Max. Tool Length:  11.81"

Maximum Tool Weight:  22 LBS

ATC Tool Shank:  Mazak KM63

Rotary Tool Spindle Speed:  12,000 RPM

Rotary Tool Spindle Horsepower:  25 HP

Maximum Face Mill:  4"

Maximum End Mill:  1.25"

Maximum Drill:  1.18"

Maximum Tap:  1-8 UNC


AXIS TRAVELS:     

B-Axis:  225 Degrees

Y-Axis:  +/- 3.15"

X-Axis:  22.83"

Z-Axis:  41.14"

Second Headstock W-Axis:  41.34"


AXIS RAPID RATES:     

Y-Axis:  1024 IPM

X-Axis:  1496 IPM

Z-Axis:  1496 IPM

Second Headstock W-Axis:  1181 IPM

C-Axis:  555 RPM

Floor Space:  87" X 151"

Machine Height:  103"

Machine Weight:  21,120 LBS.


Includes:


Y-Axis Control     

N-Simultaneous 5 Axis Package     

ATS Collet Chuck for Main Spindle   

8" Chuck for Sub Spindle  

Chip Conveyor and coolant tank

40 Tool ATC Capacity (40 tools total)  

Tool Eye  

Miscellaneous turning and rotary tools

2nd Spindle C Axis

invbj070913jr

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.