CNC Lathe w/Live Tooling 

Please click photos or list for details

Please Scroll Down:

2007 Haas TL25 CNC Lathe w/Live Tooling

HAAS TL25 2007 CNC LATHE
LIVE TOOLING subspindle 

Capacity:
Swing Over Bed / Swing Over Saddle: 30" / 14.5"
Maximum Tu rning Diameter / Length: 16.0" / 34.0"
Distance Between Centers: 39.0"
Spindle:
Spindle Speeds: 3,400 RPM
Bar Cap: 3.0"
Main Motor (30 min. / continuous): 30 HP
Turret:
Number of Positions: 12 Tools
X-Axis Travel: 11.3"
Z-Longitudinal: 34"
Rapids:
Rapid Traverse (X & Z ): 710 IPM 

Dimensions:
Floor Space (L x W x H): 149" x 77" x 75"
Weight (approx): 16,000 LBS
Torque w/optional transmission: 850 [email protected] RPM
Power requirements: 28 KVA 

Equipped With:
12.0" chuck
Haas 32 BIT Control 

Parts Catcher
Auto jet blast
BAR3010GB Interface
Barfeeder Interface
2-Speed gearbox
High torque tool option
16MB Memory Macros
Internal transformer
Axial drive toolholders 

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

 2007 Mazak Integrex 200IV ST CNC Milling Turn w/Dual Spindle

 Control Mazatrol Matrix CNC Control with Voice Adviser 

Max Swing / Max Swing Over Cross Slide 26" 

Max Machining Diameter Upper / Lower 26" / 10.6" 

Max Machining Length 40" 

Main Spindle Chuck Size 8" 

Main Spindle Speeds 5,000 RPM 

Main Spindle Nose / Bore A2-6 

Main Spindle Indexing Full C-axis (.001 Degree) 

Milling Head Travel X / Z 22.83" x 60.82" 

Rapid Traverse Rates Milling Head (X / Z) 1,496 IPM 

Milling Head B-Axis Programmable 225 Degrees (120 Deg Left / 105 Deg Right) 

Milling Head Speeds 12,000 Max RPM 

Milling Head Drive 25 HP 

Milling Head Taper 

Automatic Tool Changer Capacity for Milling 

Head 40 Station Automatic Tool Changer 

Max Tool Diameter/ Length / Weight 3.54" or 4.92" x 11/81" Length, 22 Lbs. 

Second Spindle Chuck Size 8" 

Second Spindle Speeds 5,000 RPM 

Second Spindle Headstock Stroke (W Axis) 61.02" 

Second Spindle Rapid Traverse Rate 1,181 IPM (W) 

Second Spindle Indexing Full C-Axis (.001 Degree) 

Lower Turret Capacity 9 Stations 

Lower Turret Index Time .14 Seconds Per Step 

Lower Turret Travels 5.91" x 58.66" 

Lower Turret Rapid Traverse Rate (X / Z) 1,496 IPM 

Main Spindle Drive 30 / 20 HP 

Cooolant Capacity 120 Gallons 

Tool Changer Speed 1.3 Seconds Tool to Tool 

Equipped With: 

Mazatrol Matrix CNC Control with Vice Adviser, 

Daikin Chiller, 

40 Station Automatic Tool Changer, 

Mayfran Lift-Up Chip Conveyor, 

Live Milling Head with B-Axis Lower 9 Station Turret, 

(2) SMW Auto-Block 8.2" KNCS-N-225-65 3-Jaw Quick Change Chucks, 

Thru-Spindle Coolant for Milling Head, 

Coolant system, 

Tool Presetter for Milling Head and Lower Turret, 

(3) USB 

Ports and Flash Drive, 

Ethernet, 

Dual Remote Foot Trips, Manuals and Schematics. 

Electrics: 

230 / 460 Volt, 3 Phase 

Approximate Machine Dimensions: 200"l x 100"w x 102.5"h 

Approximate Weight: 26840 lbs.               On Location   $345,000.00 USD

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

2007 HAAS SL40L CNC Lathe w/Live Tooling 

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

2007 Haas SL40L 4" Capacity/Tlstk 

80" cc Tool presetter conv st 4.6bore LIVE Tooling

Excellent Condition

Description:

Model SL-40L THE 

Year 2007 

Control Haas CNC 

Location Germany 

Term of delivery 4 weeks 

Quotation FOB Port

Technical details

Chucking diameter 14.96" / 380mm 

Turning length 80" / 2032mm 

x-Axis travel 17" / 432mm 

Z-Axis travel 80" / 2032mm 

Bar diameter 4" / 102mm 

 Rapid Traverse X-axis 18m/min 

Rapid Traverse Z-axis 8.1m/min 

Turning speed range - spindle 10 - 

Power capacity - main spindle 40 HP / 30kW 

Spindle bore 4.6"/117 mm 

Turret 12 positions 

Tool Taper CAT40 

 Max Tool Weight 15 lbs 

Electrical 230/440 VAC 3 Phase 

Dimensions 23' x 10' x 7.5' 

Weight 28,000 lbs 

Accessories:

Chip Conveyor

Coolant System

Tool Setter

Steady Rest Preparation

3-Jaw Chuck

Tool drive mechanism

Tailstock

Live Tooling C Axis        $POR$ 

2005 OKUMA NINE AXIS CNC TURNING AND MILLING CENTER Macturn 250W 2 sp

USED OKUMA NINE AXIS CNC TURNING AND MILLING  

Model: Macturn 250W
Max. turning diameter: 21.650”
Max. turning length: 40.350”
Main Spindle bore: 2.44”
Main spindle bar capacity: 2”
Main spindle HP: 30
Main spindle chuck diameter: 8”
Main spindle RPM: 5000
Subspindle: 6” chuck, 6000 rpm, 10HP, 1.65” bore
ATC: 44 place
B-axis head: 15,000 rpm
Y axis travel: 6.30”
12 station lower turret with live milling
Weight: approx. 30,000 lbs

EQUIPPED WITH:
Y axis on upper head
Twin spindles
High pressure coolant thru spindle
ATC magazine mounted on the saddle so tool changes can be done anywhere
Mist collector
Chip conveyor
OSP E100L control with upgraded tolerance resolution to .00001”, 3-D simulation, MacMan, OSP-WinX
7-Live tool holders
Full compliment of tooling
LNS Quick Servo Load 80 bar feeder
Two chucks
Two ATS collet noses
Full C axis on both spindles
Touch sensor
Gantry style parts catcher 

Condition: Very Good              Price: $299,500.00

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

Mazak Slant-Turn 30 ATC M/C CNC Turning & Mill Center

Specifications: 

MAZAK Slant-Turn 30 ATC M/C CNC Turning & Mill Center 

Swing Over Bed 18" 

Distance Between Centers 60.6" 

Cross Travel, X-Axis 13.2" 

Z-Axis Travel 60" 

C-Axis .001 Degrees 

Tool Positions 16 

Rotary Tool Spindle Drive 5 HP 

Spindle Nose A2-8" 

Spindle Hole Diameter 3.15" 

Spindle Hole w/ Draw tube 2.75" 

Spindle Speed Range 6-2200 RPM 

Spindle Drive Motor 30 HP AC 

Milling Spindle 1500 RPM 

Milling Spindle Motor 5 HP 

Feed Range 1-196 IPM 

Rapid Feed Rate 393 IPM 

Electrics 440/220/3/60 

Approximate Dimensions 189"x74"x96" 

Approximate Weight 11,000 Lbs 


EQUIPPED WITH: 

Mazatrol T3 3-Axis CNC W/ CRT, Micro Disk Storage 

14" 3-Jaw Chuck 

C-Axis Spindle 

Live Tooling For Milling/Drilling/Tapping 

16-Station Tool Changing Turret 

Approx. 23 Tools: 6-Milling, 9-Boring, 8-Turning 

Linear & Circular Interpolation 

Programmable Tailstock W/ Built-In Live Center 

Tool Presetter 

Manuals 

Splash Enclosure & Coolant System 

invep062013-chase
Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

1998 MAZAK INTEGREX 35Y 3.46in bore c axis 40atc live tooling 12in ch T ctl  

1998 MAZAK INTEGREX 35Y 3.46in bore c axis 40atc live tooling 12in ch T plus ctl 

  MAX. SWING 22.5" 

 MAX. MACHINING DIAMETER 22.5" 

 MAX. MACHINING LENGTH 60" CONFIRMING 

 SPINDLE BORE 3.46" 

 SPINDLE NOSE A2-8 

 MAX. BAR CAPACITY 3.0" 

 SPINDLE SPEEDS 35-3,000 RPM 

 TRAVELS: C-AXIS 360,000 DEG. 

 X-AXIS 17.75" 

 Z-AXIS 60" CONFIRMING 

 Y-AXIS +/-3.5" 

 RAPID TRAVERSE: C-AXIS 100 IPM 

 X-AXIS 472 IPM 

 Z-AXIS 708 IPM 

 Y-AXIS 393 IPM 

 MIN. SPINDLE INDEXING .001 DEGREE 

 TYPE OF TURRET 2 POS W/ATC 

 TOOL MAGAZINE CAPACITY 40 ATC 

 ROTARY TOOL SPINDLE SPEED 6,000 RPM 

 ROTARY TOOL SPINDLE NOSE NO. 40 

 ROTARY TOOL MOTOR 10 HP 

 TAILSTOCK CENTER MT#5 

 TAILSTOCK STROKE 35.43" 

 TAILSTOCK QUILL STROKE 5.1" 

 MAIN MOTOR 40 HP

 EQUIPPED WITH: 

 MAZATROL T-PLUS CONTROL 

 40 ATC (28 MILLING/12 TURNING 

 EIA/ISO INPUT 

 WORK MEASUREMENT W/O SCALE 

 COOLANT THRU MILLING HEAD 

 MILLING SPINDLE SYNCH TAP 

 HI PRESSURE COOLANT 

 71 PSI/5.3 GPM 

 12" CHUCK 

 AUTO PARTS CATCHER         CHIP CONVEYOR 

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

Gildemeister Model CTX 400 Series II Dual Spindle / Live Tool CNC Lathe

2002 Gildemeister Model CTX 400 Series II Dual Spindle / Live Tool CNC Lathe


Turning diameter: 16.53"/ 420 mm

Turning length: 20" / 500 mm

Swing diameter: 22.4" / 570 mm

Spindle bore: 3.11" / 79 mm

Spindle turning speed range: 25 - 5000 U/min

Spindle motor: 28/21 kW

Subspindle - speed range : 25 - 5000 U/min

Spindle motor: 12/9 kW

Subspindle carriage Z-axis: 3.11" / 575 mm

Y-Axis: 3.00"/ +- 40 mm

Z-Axis: 25" / 635 mm

X-Axis: 8.6" / 220 mm

Rapid traverse: 20/24 m/min

Total power requirement: 42 kW

  

Equipped with:

  

Heidenhain Turn Plus Pilot 4290 Version 6.1

Chip Conveyor

Collet Chucks Micro Centric SP.0118.0167.00 Main   CB42-ND sub

Micro Centric CB42-ND Sub

(2) 3- jaw chucks are Shunk 225-71 Main   165-37 Sub

LNS Quick Load Barfeed

Tool Presetter

Parts Catcher

Live Tool Holders

Part Exchanger between Main and Sub Spindle

Sub-Spindle Can Be Used As Tailstock

Coolant Thru Sub-Spindle

Full C-Axis on Both Spindles

Transformer - 480/3/60

Full Set of Manuals

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

invts050313jr