Flanger Dished End

Please click photos or list for details

Leifield VDM4000 Vertical Spinning/Dishing Machine

VERTICAL HEAVY DUTY SPINNING / DISHING  MACHINE
 
St. no.                                                             : 6212
 
Make                                                              : LEIFELD
 
Type                                                               : VDM 4000 E
 
Machine no.                                                   : 15.307/1/2
 
Component diameter max.                            :                        3.900     mm
 
Spinning, Steel bottoms                                 :                        5 - 25     mm
 
              Alu. bottoms                                     :                        8 - 30     mm
 
              Stainless steel bottoms                    :                        4 - 15     mm
 
Spinning and bend over (flenge)
 
              Steel bottoms                                   :                        5 - 12     mm
 
              Alu. bottoms                                     :                        8 - 15     mm
 
              Stainless steel bottoms                    :                          4 - 7     mm
 
Distance between centres                              :                        1.600     mm
 
Tailstock stroke                                              :                        1.150     mm
 
Top slide - longitudinal travel                        :                         1750     mm
 
Top slide - transverse travel                           :                           700     mm
 
Top slide - pressure - longit.                           :                             30     Ton
 
Top slide - pressure - transv.                          :                             50     Ton
 
Top slide - feeds - longit./advance                 :                 0,003 - 4,0     m/min.
 
Top slide - feeds - longit./return                     :                 0,040 - 2,8     m/min.
 
Top slide - feeds - transv./advance                 :                 0,006 - 2,1     m/min.
 
Top slide - feeds - transv./return                     :                 0,040 - 4,7     m/min.
 
Lower slide - longitudinal travel                    :                        1.890     mm
 
Lower slide - transverse travel                       :                           700     mm
 
Lower slide - pressure - longitudinal              :                             55     Ton
 
Lower slide - pressure - transverse                 :                             55     Ton
 
Lower slide - feeds - longit./advance             :                 0,040 - 1,7     m/min.
 
Lower slide - feeds - longit./return                 :                 0,090 - 4,5     m/min.
 
Lower slide - feeds - transv./advance             :                 0,040 - 1,5     m/min.
 
Lower slide - feeds - transv./return                 :                 0,090 - 3,4     m/min.
 
Ejector stroke                                                 :                           700     mm
 
Spindle speeds, infinitely variable, 2 gears   :                      1 - 500     rpm
 
Main motor power                                          :                           126     kW
 
Weight of the machine ca.                             :                       62.000     kg*
 
Operation                                                       :                            el.
 
The machine is equiped with tool mounting, special design BIN 55022, size 15.
 
*Weight without electrics, hydraulics and tools.
 
 
 
There are 7 (seven) moulds:
 
1.    11 feet, 2 inches (approx. 3403,6 mm)
 
2.    9 feet, 4 inches (approx. 2844,8 mm)
 
3.    8 feet (approx. 2438,4 mm)
 
4.    7 feet, 6 inches (approx. 2286 mm)
 
5.    6 feet, 7 inches (approx. 1846,6 mm)
 
6.    4 feet, 6 inches (approx. 1371,6 mm)
 
7.    5 feet, 9 inches (approx. 1752,6 mm) 
 
Price, as is, free loaded       ÔéČuro          235.000

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.
Scalabrin Tomassing 250 Ton Dishing Press

 

Scalabrin Tomassing 250 Ton Dishing Press
Capacity 7.000 mm x 250 ton
Maximum disk capacity 7.000 mm
Maximum force capacity 250 Ton
Maximum thickness 17 mm
Diameter of the cylinder 280 mm / 350 mm
Working speed 962 ccm at the speed of 41 cm/min
Rapid approach 615 ccm at the speed of 900 cm/min
Return speed 347 ccm at the speed of 900 cm/min
This Machine was totally retrofitted in 2005
The machine was built in 1965 and totally rebuild in 2005.

$219,000.00 USD dismantled and loaded for transport/France

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

1977 Schleifstein Flanger 4M x 25mm

 

Brand : SCHLEIFSTEIN

Type : MV20-B/4022

Build : 1977

"SCHLEIFSTEIN" Flanging Machine

Technical dates :

Capacity
22 mm   AT 40 Kp/mm 2

25 mm   AT 45 Kp/mm 2

STAINLESS-STEEL   18 mm    AT 75 Kp/mm 2
Maximum Dish Diameter
up to 4.000 mm
Machine is fully equipped with 11 Dies with a weight from 180 up to of 1.820 Kg ,
with  Knuckle Radius to 500 / 600 / 800 / 900 mm
Machine can be inspected in a working condition.
Additional technical details available on request

Price
135.000,00 Euro ? Ex works, On foundation

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

Faccin 500 ton x 5000mm hydraulic dishing press

Faccin 500 ton x 5000mm hydraulic dishing press


Location:

Asia and Pacific - All


Manufacturer:

Faccin-Italy

Type:

hydraulic dishing press

Model:

500 ton x 5000mm

Year:

1996

Condition:

very good

Price:

- USD

Quantity:

1

Description:

500 Ton x 5000mm Faccin Hydraulic Dishing Press - Hydraulic Ring Frame Power Press 

Mid 1990~s 

Capacity Estimated at 500Tons. 

Approx Distance Between Frames 5050mm x 1590mm High x 1200mm Front to Back. 

Made in Italy 

high quality construction and brand name 


invts141113 


Industrial Machinery Solutions Inc


Ad Number: 336096


Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.

siempelkamp dishing press hydraulic 600 ton 1998update

siempelkamp dishing press hydraulic 600 ton 1998update


Manufacturer:

Siempelkamp of germany

Type:

dishing press hydraulic flanging available

Model:

600 ton x 4500mm

Year:

1998 updated

Condition:

very good

Price:

- USD

Quantity:

1


Description:

Siempelkamp of Germany 


1973 SIEMPELKAMP DISHING PRESS 600 TON 


Manufacturing year 1973 / revamped 1998 

Frame and hydraulics system renewed and updated 1998

Electricity and locigsystems installed 2009 

Max pressing force 600t 

Opening 4500mm (177") 

Max thickness for carbon steel 40mm (1.57480") 

Manufacturing diameter range with manipulators 1000-3000mm (40"~10') 

With manual rotation range depends on tooling approx.. 4500mm (177") 


10 sets of Tools are included (R280 to R670) 

(I want to point out that the Manipulator on this Press only has 2500mm capacity) 


invts131113 



Ad Number: 336030

Thank you for contacting us. We will get back to you as soon as possible
Oops. An error occurred.
Click here to try again.