30x16x20in Haas VF-2, 2004
30x16x20in Haas VF-2, 2004
Specification:
Table:
Table Size: 36" x 14"
Maximum Table Load: 3000 Lbs
Travels:
X-Axis Travel: 30"
Y-Axis Travel: 16"
Z-Axis Travel: 20"
Spindle Nose to Table: 4" - 24"
Spindle:
Spindle Speeds: 7,500 RPM
Spindle Taper: 40 Taper
Main Motor: 20 HP
Max Torque: 75 ft-lb @ 1400 rpm
Max Torque w/opt Gearbox: 250 ft-lb @ 450 rpm
Tool Changer:
Tool Changer Positions: 20 ATC
Max Tool Diameter (full): 3.5"
Max Tool Weight: 12 lb
Tool-to-Tool (avg): 4.2 sec
Chip-to-Chip (avg): 4.5 sec
Rapids:
Rapid Traverse (X, Y & Z ): 1000 IPM
Feed Rate: 650 IPM
Accuracy:
Positioning (±): 0.0002"
Repeatability (±): 0.0001"
General:
Weight (approx.): 7300 lb
Air Required: 4 scfm, 100 psi
Coolant Capacity: 55 gal
Power (options may increase requirement): 195-260 VAC/50 A
: 354-488 VAC/30 A
Equipped With:
Haas Value Option Package A
20 HP 2-Speed Gear Drive
1000 IPM Rapid Traverse
Through Spindle Coolant
Part Probing
Programmable Coolant Nozzles
Remove Jog Handle
Chip Auger
X, Y, Z Axis Ballscrews were replaced with new
Spindle was replaced with new
Automatic Tool Change was replaced with tnew
Servo Time: 3192 hours
Motion Time: 14800 hours
Spindle Time: 14329 hours
Video available upon request
Invykm300315
Ind07/23/2015-Johanes
