Roll Plate Bender
Please click photos or list for details
-1.jpg)
40x3000mm Davi MCB3045 plate bending roll 4rollNC, 2006
-1.jpg)
 Roundo Plate bending roll Model PS 390 x 10 all-1.JPG)
5.5x144in Cold Voest Alpine Plate Roll, 1979
 Roundo 3 Roll Plate Roll, 1988 all-1.jpg)
8' x 2 1/2" Pullmax Hydraulic 3-Roll Double Pinch Bending Roll
Specifications:
Maximum Bending Capacity 2 ½” x 8’
Maximum Pre-Bending Capacity 2 ½” x 8’
Cone Bending Capacity 1 3/16” x 8’
Diameter of Bending Rolls 21 5/8”
Roll Length 108”
Main Motor 84 HP
Power Requirements 3/60/575V
Dimensions (LxWxH) 215” x 114” x 127”
Shipping Weight 102,300 lbs
Equipped With:
- Cone Bending Attachment
- Longitudinal Groove for Plate Alignment
- Hydraulic Tilting End Yoke
- Manuals & Foundation Drawings
- Speed Steplessly Adjustable
*Note: Capacity ratings based on 40,000psi yield
and 66,000 psi tensile material strength.
3,100mm x 100mm Faccin 3-roll variable geometry plate bending machine
3,100mm x 100mm (10’ x 3.94”) Faccin 3-roll variable geometry plate bending machine. New in 2008
bending capacity 3100 x 100 mm
hydraulic operated for cylinders and cones
rolling plate thickness 100 mm
plate yield strength 260 N/mm2 maximum bending capacity plate thickness 120 mm
rolling plate thickness 85 mm
plate yield strength 360 N/mm2
top roll size 720 mm
lower rolls size 650 mm
rolls surface length 3100 mm
machine configuration:
hardening of the 3 rolls
hydraulic cones bending attachment
programmable NC digital readout
overload hydraulic safety control
emergency shut-down in compliance with machine tools regulation
electric power 110 Kw voltage 380 Vac / 50 Hz
dimensions 8600 x 3500 x H 3700 mm
weight 90 Tons.
10' x 5/8" ~ 3000mm x 13/16mm Faccin CNC 4 Roll Hydraulic Plate Roll
3000mm x 13/16mm Faccin CNC 4 Roll Hydraulic Plate Roll
Model # 4HEL 3134
Serial # 00112118-2133A
According to the factory manual, this unit is 3000mm x 13/16mm
3000mm Length Capacity
16mm Bending Capacity
13mm Pre Bending Capacity
Under power in South East USA
10' x 1" Hill Acme Plate Roll
10' X 1" HILL ACME
3 ROLL PLATE ROLL
DROP END
YEAR 1978
CONDITION OF ROLLS LIKE NEW EX NAVY
PHOTOS ENCLOSED
MADE IN USA
STRONG AND WELL BUILT
ORIGINAL PLATE ENCLOSED SHOWING CAPACITIES
PRICE $115,000.00
DAVI 10 X 1 INCH 4 ROLL HYD MOD MCB3037 1996
DAVI 10 X 1 INCH 4 ROLL HYD MOD MCB3037 1996
Manufacturer:
DAVI
Type:
DOUBLE PINCH ROLL HYD CNC 4 ROLL
Model:
MCB3037 10 X 1 INCH 4 ROLL
Year:
1996
Condition:
Excellent
Price:
- USD
Quantity:
1
Type of Seller:
Dealer Non-Owner
Description:
10'X 1" DAVI DOUBLE INITIAL PINCH HYDRAULIC PLATE ROLL
MODEL MCB-3037
1996
L
SPECIFICATIONS
4 ROLLS
(2) TOP ROLLS 14.8" X 11"
ALL HYD. DRIVE
VARI - SPEED
20 HP DRIVE
CNC CONTROL
INVLNOTBR281013
Ad Number: 335514
10' x 1 1/8" Roundo 3 Roll Double Pinch Hydraulic Plate Roll
HYDRAULIC DRIVE ROTATION THRU GEARS
HYDRAULIC ROLL ADJUSTMENT
HYDRAULIC DROP-END
CAPACITY:
ROLLING AT 5X TOP ROLL,,,,,,,,,,10' X 1" A36
ROLLING AT 10X TOP ROLL,,,,,,,,,10' x 1-1/8"
ROLLING AT MINIMUM ID,,,10' X 9/16" AT 20" ID
PRE-BENDING THICKNESS,,,10' X 1/2" AT 20" ID
,,,10' X 3/4" AT 80" ID
CAPACITY IS BASED ON A36 STEEL PLATE WITH A
RATING OF 36,000 PSI YIELD AND 80,000 PSI
TENSILE.
TECHNICAL DATA
TOP ROLL DIAMETER,,,,,,,,,,,,,,,, 14.17"
SIDE ROLLS DIAMETER,,,,,,,,,,,,,, 14.17"
SPEED,,,,,,,,,,,,,,,,,,,,,,,,,,,, 0 - 23 FPM
MOTOR,,,,,,,,,,,,,,,,,,,,,,,,,,,, 36 HP
MANUAL INCLUDED
Approximate Dimensions: 75"(LR) X 206"(FB) X 72"(H)
Approximate Weight: 38,200 Lbs.
Serial No: 966147 Year Mfg. 1996
3M x 65mm MG (10' x 2.6") CNC 4 Roll 2007 Hydraulic Plate Roll
4-Roll Plate bending roll cnc
Condition: Excellent
Description:
Graphic CNC touch screen
thickness plate rolling 65 mm
pre-pinch thickness 50 mm
max width 3100 mm
top roll 640
pinch roll 550
side rolls 470 mm
hardening of the 4 roll
cone bending attachment
electric Kw 55 voltage 380/50Hz
CNC controller 15" touch screen 5 axis CAD /CAM interface,
with automatic bending programs upon input of plate parameters.
3M x 75mm (10' x 3") Hauesler 3 Roll Hydraulic Plate Roll 1978
4-Roll Hydraulic Double Pinch Plate Roll
Age: 1978
Model: VRM-hyd 10/3
Maximum Rolling Capacity .... 3" X 10'
Maximum Rolling Capacity .... 6" x 32"
Top Roll Diameter ........... 29.92"
Bottom Roll Diameter ........ 27.95"
Side Roll Diameter .......... 24"
Main Drive Motor ............ 214 HP
Approximate Shipping Weight . 260,200 Lbs
Overall Dimensions (LxWxH) .. 232" x 167" x 185"
Equipped With:
Moveable Operators Control Console
Roll Position Indicators
4-Roll Machine Design
Hardened & Ground Rolls
(2) Independent Hydraulic Powered Driven Rolls
(3) Independent Hydraulic Adjustable Rolls
Hydraulic Drop End
** Excellent Condition**
10' x 4 1/4" Davi 4 Hydraulic w/Leonardo CNC Control Roll
Length of Top Roll:10'2"
Diameter of Top Roll:33"
Bottom Clamping Roll Diameters:30"
Diameter of Side Rolls:25"
Rolling Speeds:20 FPM
Main Motor Drive:250 HP
Equipped With:Davi Leonardo CNC Control With Graphics, Power
Driven Top and Bottom Rolls, Electronic Syncronized Parrallel
Control, Low Frame Design for Small Diameter Cone Capability,
Dynamic Permanent Lubrication
DAVI 4-ROLLER CNC HYDRAULIC BENDING MACHINE Mod MCB 3090 16-Ax 3000 mm x 100mm
USED DAVI 4-ROLLER CNC HYDRAULIC BENDING MACHINE
Model MCB 3090
16-Axes
3000 mm Max. Width Of Sheet Metal
15 mm Max. Bending Thickness
100 mm Max. Bending Thickness, Cold
740 mm Max. Diameter Of Upper Roller
660 mm Diameter Of Lower Roller
4.5 To 5.0 m/min Bending Speed
149 kW Main Drive Power
62 kW Adjustment Power
9 kW Conveyor Drive Power
168 kVA Connecting Power
Weight: 275,578 Lbs. (With Manipulator Kit For Only One Worker)
Tempered Rolls; Hardened Rolls
20 Tons Inclination For Conic Works
Lateral Support 10 Tons Capacity
Two Hydraulic Pushers
Central Support 20 Tons Capacity
Lateral/Posterior Support 10 Tons Capacity
Graphics CNC With 16-Axis Controlled (Only One Operator Can Manage The Entire Line)
Leonardo Pro CAD CAM CNC Control
Two Lateral Hydraulic Supports Capacity 3 Tons
Two Hydraulic Pushers
Hydraulic Vertical Support Reinforced And Auto Leveled
Cone Production In 15 Minutes
Cone Kits Reinforced
Kit High Speed
14 mt Length Transfer Table
10' x 8" Davi CNC 3 Roll Hydraulic Plate Roll
Will Ship Worldwide Machine is Packed and Ready To Ship
Three-Roll Bending Machine:
With Variable Axis 'MAV'
8" x 10' DAVI CNC 3-Roll Hydraulic Plate Roll
2008
Model: MAV 30125
Rated Maximum Bending Thickness ...... 8" x 10'
Max. Pre-Bending Thickness ........... 7" x 10'
Re-Rolling Mode ...................... 4.9" x 10'
Top Roll Diameter .................... 50"
Side Roll Diameters .................. 44"
Rolling Speed ........................ Up to 20'/min
Main Motor (Combination of 3 Rolls) .. 450 HP
EQUIPPED WITH:
DAVI "MAV-GENIUS-PRO" CNC Control
Cone Rolling (All three rolls can be tilted)
Electronic Automatic Balancing System
Low Frame Design (Permits rolling small diameter cones)
Permanent Lubrication Technology
Independant Motors on Each Roll
All three motors directly splined on the rolls shaft
THREE ROLL HYDRAULIC PLATE ROLLING MACHINE WITH VARIABLE AXIS 'MAV'
The MAV three roll machine is the most innovative and revolutionary machine on the market. It is a rolling machine that has many advantages unavailable on any other three roll machine. The MAV with its "variable axis" is the simplest and easiest rolling machine to use. It works as a press in the pre-bending of the plate edges and is in fact more widely known as the "Press-Roll". Reducing the distance between the lower lateral rolls it is possible to obtain an excellent flat end, in fact the length of the flat end is shorter than any other three roll machine. If the distance between the lateral rolls is increased, this allows very thick plates to be bent, thus increasing the capability of the machine considerably.
Pre-bending is performed by "pressing" of the upper roll (and not by lower roll moving or swinging up from rest position which automatically cause the plate to tilt). The result is the plate is handled always horizontally and not tilted dangerously during the pre-bending process. The bending process in the MAV means the weight of the plate does not influence at all the pressing power of the machine because the rolls are not elevated. Thanks to its innovative frame design, the MAV is the most compact rolling machine currently available on the market and even for medium large capacitie, it does not need to be placed in a pit. Cone rolling is also much simpler than with any other three roll design as all three rolls can be moved independently to adapt perfectly to the geometry of the cone to be formed.
EST: Energy Savings
Low-efficiency system (reduction units, bronze bushings, gear belts, carding, rectilinear guides) replaced by new high-efficiency solution: hydraulic planetary drive directly splined on roll shaft, friction-free swing guides, friction-free self-aligning bearing, multi-way hydro power system.
PRICE $5,090,930.00 Loaded on 10 Trucks Looking for offer !!!
12' x 7/16" WMD 3 Roll Hydraulic Plate Roll
$89,500.00 FOB
12' x 4.25" Bertsch 3 roll electrical hydraulic hydraulic drive model 36
3600mm x 100/120mm Wilhelmsburger Plate Bending Rolls
WILHELMSBURGER PLATE BENDING ROLLS
Max capacity Rolling 3,660 x 120mm
Max Capacity Pre bending 3,660 x 100 mm
Top Roll Diameter 950 mm
Cone Rolling, Power Drop End
Steel Frame
Year 1976
Machine Weight 229 ton
Still UNDER POWER
20' x 5/8" WDM model 402-15723 Special 4 -Roll Hyd Plate System
Serial No. 60698 – 04 (Year of manufacture: 2006)
Specifications:
Top Roll Diameter 15.5"
Bottom & Side Roll Diameter 24"
Motor 60 HP Voltage460V/3-Phase
Equipped With:
Parts Ejector Powered by Control
NC Control with Program Memory and Joystick Movement
Digital Readout on Each Roll
Hydraulic Yoke
Pressure Up on Both Ends of Each Roll
Extra top roll to roll 5/16” material
6M x 50/60mm Nhaeusler hydraulic 4-Roll-Plate Bending VRM-hy
Year of construction 1985
Overhauled in manufacturers work 2010
TECHNICAL DATA
Max. width of plate 6'000 mm (19.6ft)
Thickness of plate at max. yield point of 240 N/mm2
for edge setting at max with of plate 50 mm at bend-DIA 3,000 mm
(Approximately 2” at bend DIA 10ft)
at rounding 60 mm at bend-DIA 3,500 mm
(approximately 2-3/8” at DIA 12ft)
Prebending length at s = 45 mm (1.77”) X = 2.4 x s
Roll diameter top roll 850 mm (33.46”)
bottom roll 900 mm (33.43”)
side rolls 670 mm (26.37”)
Smallest bending diameter 980 mm (depending on spring back of material)
Number of rolls 4
Driven rolls 2 top- und bottom rolls
Drive over hydro motor
Working speed 2 + 4 m/min
Adjustment speed: bottom roll 0-100 + 250 mm/min (4-10”/min)
side rolls 0-200 + 500 mm/min (8-20”/min)
Speed compensation between top- and bottom roll automatic
Power 160 kW
Operation of the tilting bearing hydraulic
Tilting of the top roll hydraulic
Bearing block hydraulic
Working voltage 380 V/50 Hz/3 Ph
can be changed 480V/60Hz
(TBD if any cost will apply?!)
Indication of roll position digital
Weight of machine approx. 185 metric tons
Accessories
• Cone bending device
• Machine foreseen for changeable top roll up to min. DIA 500 mm (DIA 19.68”)
• Central lubrication
• Backlash break
• Digital display
• Mobile control
