Rolling Mills and Tube Mills
Rolling Mills and Tube Mills
1. ZR 33-C-32 . 20 HIGH SENDZIMIR ROLLING MILL FOR STAINLESS STEEL.
Specification:
COIL WIDTH : 350 - 815 MM
COIL THICKNESS : 0.03 - 3.0 MM
COIL DIA : 508 - 1600 MM
COIL WEIGHT : 10 TON
LINE SPEED : 500 MPM MAX
MOTOR POWER :
MILL : 680 KW X 1 SET
REELS : 680 KW X 2 SETS EACH REEL
2. 1400 MM WIDTH HYDROCHROLIC ACID ( HCl ) TYPE PUSH PULL PICKLING LINE
Specification:
BUILT : 2005
TYPE : HCl PUSH PULL TYPE
PRODUCTION CAPACITY : 150,000 - 250,000 TPY
STRIP THICKNESS : 1.2 - 6.4 MM
STRIP WIDTH : 600 - 1400 MM
COIL WEIGHT : 25 T0N
LINE SPEED : 120 MPM
TOTAL LINE LENGTH : 84 METER
3. 1500 MM WIDTH MINO ( ITALY ) 4 HIGH REDUCTION AND SKIN PASS COMBINATION ROLLING MILL
Specification:
WIDTH : 900 -1500 MM
ENTRY THICKNESS : 1.5 - 4.0 MM
FINISH THICKNESS : 0.30 - 0.25 MM
MILL MOTOR : 1400 KW
REWINDER MOTOR : 625 KW
THE MILL IS BRAND NEW BUT NEVER INSTALLED.
4. 1800 MM WIDTH DANIELI-WEAN PUSH PULL PICKLING LINE
Specification:
BUILT : 1995
MAKER : DANIELI-WEAN
TYPE : PUSH PULL HYDROCHLORIC ACID
WIDTH : 610 - 1880 MM
THICKNESS : 1.52 - 7.92 MM
LINE PSEED : 121 MPM
PRODUCTIO CAPACITY : 450,000 TPY
5. 400 MM WIDTH DAVY 4 HIGH , 4 STAND TANDEM COLD ROLLING MILL
Specification:
ELECTRIC CONTROL REPLACED IN 1995
WIDTH : 140 - 400 MM
ENTRY THICKNESS : 1.6 - 5.6 MM
FINISH THICKNESS : 0.38 - 2.5 MM
LINE SPEED : 653 MPM
6. 550 WIDTH DAVY 4 HIGH REVERSING MILL
Specification:
ELECTRIC UPGRADE : 1996
WIDTH : 150 - 550 MM
ENTRY THICKNESS : 1.3 - 6.5 MM
FINISH THICKNESS : 0.3 - 4.75 MM
LINE SPEED : 300 MPM
7. 1340 WIDTH COIL BUILD-UP LINE
Specification:
MAKER : YODER/DURMECH
REVAMPED IN 1974,1993,1994
WIDTH : 600 - 1340 MM
THICKNESS : 1.5 - 6.5 MM
LINE SPEED : 300 MPM
8. 16" DIA WEAN-DAMIRON ERW API TUBE MILL
Specification:
MAKER : WEAN-DAMIRON
BUILT : 1980
PIPE OD : 101.6-406 MM
WALL THICKNESS : 3.0 - 12.7 MM
MATERIAL : X52, X70
LINE SPEED : 15-50 MPM
LINE CONSIST OF : API MILL/STRAIGHTENER/END FACER/HYDR TESTER
9. 324 MM DIA ERW TUBE MILL ( NEW , NEVER INSTALLED )
Specification:
BUILT : 2014
ROUND TUBE DIA : 193.7 - 323.9 MM
SQUARE TUBE DIA : 160X160 - 260X260 MM
WALL THICKNESS : 4.0 - 10 MM
LINE SPEED : 30 MPM
CAGE TYPE FORMING STAND
10. 168 MM DIA ERW TUBE MILL ( NEW , NEVER INSTALLED )
Specification:
BUILT : 2014
ROUND TUBE DIA : 76.1-168.3 MM
SQUARE TUBE DIA : 60 X 60 - 150 X 150 MM
WALL THICKNESS : 2.4 - 8.0 MM
LINE SPEED : 30 MPM
11. 100 MM DIA ERW TUBE MILL
Specification:
BUILT : 2014
ROUND TUBE DIA : 25 - 101.6 MM
SQUARE TUBE DIA : 20 X 20 - 80 X 80 MM
WALL THICKNESS : 1.2 - 4.4 MM
LINE SPEED : 90 MPM
12. USED "U" RIB ROLL FORMING LINE
Specification:
BUILT : 1994
NO. OF STAND : 13 STAND
ROLL SPACE : 1050 MM
SHAFT DIA : 80 MM
DRIVE MOTOR : 75 KW & 22 KW
MATERIAL THICKNESS : 6 - 8 MM
13. RETROFITTED - TRAPEZOIDAL ROLLFORMING LINE
Specification:
RETROFITTED : 2013
FOR TRAPEZOIDAL CORRUGATED SHEETS FOR ROOFS & FACADES
COIL WIDTH : 1250 MM
THICKNESS : 0.3 - 0.7 MM
LINE SPEED : 22 MPM
14. RETROFITTED - TRAPEZOIDAL ROLLFORMING LINE
Specification:
RETROFITTED : 2014
FOR TRAPEZOIDAL CORRUGATED SHEETS FOR ROOFS & FACADES
COIL WIDTH : 1250 MM
THICKNESS : 0.7 - 1.5 MM
LINE SPEED : 22 MPM
15. 1000 MM WIDTH ROLLFORMING LINE FOR STRUCTURAL PROFILES
Specification:
MAKER: GASPARINI
WIDTH : 1000 MM MAX
THICKNESS : 2-6 MM
LINE SPEED : 20 MPM
16. 1219 MM WIDTH EPS SANDWICH PANEL PRODUCTION LINE
Specification:
TYPE : WALL, ROOF COMBINATION
COIL WIDTH : 1040 - 1219 MM
COIL THICKNESS : 0.3 - 0.7 MM
EPS PANEL PRODUCTS THICKNESS :40 - 250 MM
DETAILED SPECIFICATIONS, ASKING PRICE AND PHOTOS WILL BE PROVIDED UPON REQUEST.
invmmimhlp180215
Ind02/19/2015-Johanes
